Spec Sheet for NKXR-NKXR-Z Combined Needle Roller / Thrust Cylindrical Roller Bearings
NKXR-NKXR-Z Combined Needle Roller / Thrust Cylindrical Roller Bearings
The NKXR and NKXR-Z series combine a cylindrical roller thrust bearing and needle roller bearing. Together they accommodate both radial loads and axial loads in one direction. The thrust part is available capped with a cover (-Z type) so forms a gap-type seal in order to retain the grease within the bearings.
This series has a high load carrying capacity, whilst retaining a low cross section.
This series is not supplied with an inner ring, although these can be obtained separately if the bearing is not running directly on to a hardened and ground shaft.