Cylindrical Roller Thrust Bearings and Washers
Needle Roller And Cylindrical Roller Thrust Bearings and Washers
Cylindrical Roller Thrust Bearings are designed for heavy axial loads and impact loads, whilst Needle Roller Thrust Bearings still offer a high axial load they have reduced depths.
We keep a large selection in stock, starting from those made for a bore size of 10mm and going right up to some designed for a 360mm bore.
811– Series and 812– Series are complete assemblies which comprise of a cage assembly, along with a Housing locating washer (GS8 Series) and a Shaft locating washer (WS8 Series). We also keep seperate LS series Bearing Washers.
Needle Roller Thrust Bearings and Washers – AXK Series cages are a narrow needle roller thrust bearing cage and can be used with the narrow AS series needle roller thrust washers, or LS series bearing washers. Whilst loads may not be quite as high as cylindrical roller thrust bearings – this combination can create a narrow depth bearing still capable of high axial loads, with all the engineering benefits that come with it.
Imperial Needle Roller Thrust Bearings and Washers are of a narrow design – the NTA series are needle roller thrust cages and are designed to be used in conjunctions with the appropriate sizes and tolerances of flat washers of the TRA / TRB / TRC series. The TRA, TRB and TRC series have identical dimensions, apart from the thickness – were designers use the one most appropriate for their applications.
